Purification and characterization of macrolide 2''-phosphotransferase type II from a strain of Escherichia coli highly resistant to macrolide antibiotics

Hyperimmune and high-titered polyclonal pneumococcal antisera, specific for cross-reactive types within groups, were produced in adult rabbits. Purified capsular polysaccharide was injected intravenously into adult rabbits. One week later, these rabbits were given multiple intravenous injections of formalin-inactivated pneumococci of the cross-reactive type by an established method. Each of the resultant antisera were specific for the cross-reactive type indicating that the previous injection of the polysaccharide had induced epitope-specific tolerance. This method was successful for production of antisera against pneumococcal types 6A, 6B, 9N, 9V, 19F and 19A. Polyclonal rabbit pneumococcal antisera have some advantages over murine monoclonal antibodies for serologic studies and this method should be applicable for producing type-specific antibodies to cross-reactive polysaccharides of clinical interest. Further, this method is simpler and generally produces higher titered monovalent (factor) reagents than absorbed antisera.     

Modelling and analyzing density-dependent population processes: Comparison between wild and laboratory strains of the bean weevil,Callosobruchus chinensis (L.)

Three models were constructed for analyzing the population characteristics ofC. chinensis on stored beans; model A describing the whole reproductive process with a single equation, model B describing the three age-specific processes (oviposition, egg survival and larval survival) with separate equations, and model C which describes all these processes not for the whole habitat but for the individual beans comprizing it. The logit equation was employed here as a common basis to describe the density-response relationship involved. All three models showed very good fit to the experimental data obtained for both laboratory and wild strains of the weevil. The parameter values characterizing the population dynamics were, however, widely different between the two strains; the laboratory one which had been reared for some 500 generations showed significantly higher reproductive capacity, less sensitive and gentler response to crowding in both adult and egg stages, and more uniform egg distribution among individual beans, as compared with the wild strain newly introduced. Sensitivity analyses using these models suggested that these changes in population characteristics have been attained by the process of domestication or adaptation to stable laboratory conditions through a long period of time. This process seemed in effect to have optimized the population's performances in the laboratory environment. Evolutionary significance of such optimization was discussed with reference to the selection pressure which may have acted upon individuals.     

Regional differences in mitotic activity due to injury in mouse skin

Summary Mitotic activity adjacent to a wound inflicted at different sites in the mouse skin was measured 24 h after injury. A regional difference in the epidermal mitotic activity due to injury was noted. Mitotic activity was high in the anterior parts of the body including the head, lower in the middle to posterior regions of the body and lowest in the posterior-most parts of the body. Regional differences in epidermal mitotic activity due to injury were demonstrated in both female and male mice. The existence of a cranio-caudal gradient in epidermal response to injury is suggested.     

Toward more comprehensive environmental impact assessments: interlinked global models of LCIA and IAM applicable to this century

The International Journal of Life Cycle Assessment - Despite the long-standing demand for research on dynamic lifecycle assessment (LCA) for policymaking, only a few studies have addressed this...     

Genetic diversity,structure, and demography of Pandanus boninensis (Pandanaceae) with sea drifted seeds,endemic to the Ogasawara Islands of Japan: Comparison between young and old islands

Pandanus boninensis, endemic to the Ogasawara Islands, Japan, is distributed on both the older Bonin and younger Volcano Islands. In this study, we conducted population genetic analyses of P. boninensis on these islands to examine the population diversity and structure across old and young islands, to assess potential differences in population demography with island age, and to collect any evidence of migration between old and young islands. We found that the genetic diversity of expressed sequence tag (EST)–based microsatellite (SSR) markers, the nucleotide diversity of nuclear DNA sequences, and the haplotype diversity of chloroplast DNA on young islands were lower than those on old islands. Clustering analyses of EST‐SSR indicated that populations on old islands were strongly diverged from those on young islands. Approximate Bayesian computation analysis of EST‐SSR suggested that population expansion occurred on old islands while population reduction occurred on young islands. We also found evidence of migration among old islands (mostly from south to north), while it appears that there have been very few migration events between old and young islands. These differences could be due to the fact that young islands tend to be geographically isolated and support smaller populations that began a shorter time ago from limited founders. The P. boninensis populations on the Volcano Islands are interesting from an evolutionary perspective as they constitute a classic example of the early stages of progressive colonization on oceanic islands with small effective population sizes and low genetic diversity.     

Expression of cell adhesion molecule,Gicerin/CD146 during the formation of heart and in the cardiac hypertrophy

Molecular and Cellular Biochemistry - Gicerin/CD146 is a cell adhesion molecule which belongs to the immunoglobulin (Ig) superfamily. We have reported the existence of gicerin/CD146 in the nervous...     

Life cycle environmental and economic impact of a food waste recycling-farming system: a case study of organic vegetable farming in Japan

Purpose

Bio-based recycling systems and agricultural production using recycled materials are often evaluated separately. This study performs an environmental and socio-economic life cycle assessment (LCA) of a food waste treatment and spinach farming system in Japan. The environmental and economic tradeoffs of introducing a recycling system and the net environmental benefit of the substitution of market fertilizer considering operation changes are also examined.

Methods

Three scenarios were developed and compared. In the conventional (CV) scenario, food waste is collected, incinerated, and disposed of in landfill, and the farmer uses market organic fertilizer. The on-site composting (OC) scenario processes food waste using an on-site garbage disposer and transports compost to a nearby spinach farmer. Food waste in the centralized composting (CC) scenario is transported to a centralized composting facility and resultant compost is sent to the farm. Primary data were obtained from field experiments and interviews. Non-greenhouse gas (GHG) emissions from the field and nitrogen leaching to water systems were simulated using the denitrification–decomposition (DNDC) model.

The environmental LCA targeted climate change, eutrophication, and waste landfill. An input–output analysis estimated socio-economic indicators, namely gross added value and employment inducement effect.

Results and discussion

The scenario with the lowest impact is the CC scenario. Climate change and eutrophication impacts are highest in the OC scenario and waste landfill impacts are most significant in the CV scenario. The weighted impact by LIME2 can be reduced by 47% in the CC scenario and 17% in the OC scenario due to the recycling of food waste instead of dumping in the landfill. The difference in socio-economic indicators between the scenarios was relatively small, although the CV scenario encouraged more employment. The substitution effect of composting, as well as the environmental impact reduction of replacing market organic fertilizer with compost, will result in 28.7% of the avoided impacts in GHG emissions.

Conclusions

Both composting scenarios are feasible from an environmental and socio-economic perspective when compared with conventional organic production, although there is a tradeoff between waste landfill and GHG emissions for the on-site composting system. However, the OC scenario needs to save electricity to improve its environmental competitiveness with the CV scenario. When considering the substitution effect of composting, it is recommended to take into account that agricultural operation also changes.

     

Cryo-EM structure of monomeric photosystem II at 2.78 Å resolution reveals factors important for the formation of dimer

Photosystem II (PSII) functions mainly as a dimer to catalyze the light energy conversion and water oxidation reactions. However, monomeric PSII also exists and functions in vivo in some cases. The crystal structure of monomeric PSII has been solved at 3.6 Å resolution, but it is still not clear which factors contribute to the formation of the dimer. Here, we solved the structure of PSII monomer at a resolution of 2.78 Å using cryo-electron microscopy (cryo-EM). From our cryo-EM density map, we observed apparent differences in pigments and lipids in the monomer-monomer interface between the PSII monomer and dimer. One β-carotene and two sulfoquinovosyl diacylglycerol (SQDG) molecules are found in the monomer-monomer interface of the dimer structure but not in the present monomer structure, although some SQDG and other lipid molecules are found in the analogous region of the low-resolution crystal structure of the monomer, or cryo-EM structure of an apo-PSII monomer lacking the extrinsic proteins from Synechocystis sp. PCC 6803. In the current monomer structure, a large part of the PsbO subunit was also found to be disordered. These results indicate the importance of the β-carotene, SQDG and PsbO in formation of the PSII dimer.     

Accuracy of specimen-specific nonlinear finite element analysis for evaluation of radial diaphysis strength in cadaver material

The feasibility of a user-specific finite element model for predicting the in situ strength of the radius after implantation of bone plates for open fracture reduction was established. The effect of metal artifact in CT imaging was characterized. The results were verified against biomechanical test data. Fourteen cadaveric radii were divided into two groups: (1) intact radii for evaluating the accuracy of radial diaphysis strength predictions with finite element analysis and (2) radii with a locking plate affixed for evaluating metal artifact. All bones were imaged with CT. In the plated group, radii were first imaged with the plates affixed (for simulating digital plate removal). They were then subsequently imaged with the locking plates and screws removed (actual plate removal). Fracture strength of the radius diaphysis under axial compression was predicted with a three-dimensional, specimen-specific, nonlinear finite element analysis for both the intact and plated bones (bones with and without the plate captured in the scan). Specimens were then loaded to failure using a universal testing machine to verify the actual fracture load. In the intact group, the physical and predicted fracture loads were strongly correlated. For radii with plates affixed, the physical and predicted (simulated plate removal and actual plate removal) fracture loads were strongly correlated. This study demonstrates that our specimen-specific finite element analysis can accurately predict the strength of the radial diaphysis. The metal artifact from CT imaging was shown to produce an overestimate of strength.